Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Service manual - Rhode and Shwartz FSAS 1.8 GHz spectrum analyser with tracking gen

Status
Not open for further replies.
J

jeanvn

Newbie level 2
Joined
Apr 16, 2012
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,293
Hi All,

I have an R&S FSAS 1.8GHz spectrum analyser with tracking gen. The tracking gen amplitude is very low about -30dBm.
I need a service manual for the masjien, even if it just for the tracking generator.

Thanks in advance.
 

Dear jeanvn,

unfortunately there are only few documents for the R&S FSAS available, but if you write an e-mail to our colleagues from Customer Support (customersupport@rohde-schwarz.com) giving the reference number RS#489927 they will try to help you.

all the best,
Gerti from the Rohde & Schwarz Social Media Team
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top