Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Serial Interface with Microcontroller

Status
Not open for further replies.

vikky

Full Member level 3
Joined
Oct 18, 2007
Messages
150
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,298
Activity points
2,664
Hello,

Can anyone help me with a sample program for a serial interface of a printer with a Microcontroller.

Thank you.
 

Hello,

Can anyone help me with a sample program for a serial interface of a printer with a Microcontroller.

Thank you.


https://learn.adafruit.com/mini-thermal-receipt-printer/microcontroller

10438-06.jpg



https://www.sparkfun.com/products/10438



Best regards,
Peter

;-)
 

Thanks Peter for the reply.My problem is i need to control the RTS pin too using the printer.In the datasheet it is mentioned as thus XON / XOFF Transmission timing - XON (11 H) Transmission • When the receive buffer is released from the buffer full state (49.5KB) - XOFF (13 H) Transmission • When the receive buffer becomes full(50KB) • When an error has occurred.

Can you please advise me how to do flow control.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top