Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Sending SMS using rf module

Status
Not open for further replies.
You should have a RF receiver at the GSM modem side and the data out pin of the RF receiver (if TTL level) has to be given to Rx pin of GSM modem. (if you transmit ascii data like "AT" from the transmitter the RF receiver at the GSM side will receive and demodulate it at give ascii data "AT" as output which when fed to GSM modem through Rx pin will give AT Command to the modem.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top