Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Searching for Antenna with Beamwidth of 120 Degree

Status
Not open for further replies.

TXRX

Full Member level 2
Joined
Mar 7, 2012
Messages
143
Helped
2
Reputation
4
Reaction score
5
Trophy points
1,298
Activity points
2,252
Hi,

I search an Antenna with Beamwidth of 120x120 Degree, Any ideas ?

The frequency is at C-BAND and it will preferable to install on PCB.

The polarization: Linear
 

Hi
I think it is difficult to search about it. are u design antenna for handset using mobile tech ? I think u should design dipole antenna
 

Hi vcoltech,

No, it is not for Mobile, i try wirh patch antenna but i can reach onlt to around of 100 degree.
 

Hi,

With Patch + Parasitic Patch i reach to 120 degree at E-Plane but in H-Plane i reach to 90 degree, Is there any idea how to reach to 120 degree at H-Plane ?
 

You can check whether this antenna is you wanted SMA atenna, spring antenna ------www.digirf.com/En/Product-72.html
 

You can check whether this antenna is you wanted SMA atenna, spring antenna ------www.digirf.com/En/Product-72.html

you gave me link to monopole with wide beamwidth.

- - - Updated - - -

Hi,

I design the antenna, not purchase it.

I search for a topology with a beamwidth of 120x120.

Doron
 

Try a spiral on a cone.
 

Hi,

I design the antenna, not purchase it.

I search for a topology with a beamwidth of 120x120.

Doron

Well, spend the $30, get one, pry it open, and see what is inside! Then you can design your own with the same topology.
 

Hi TXRX,
I'm now planning a patch antenna with similar requirements regarding Beamwidth,
can you send me your design?
120X90 deg beamwidth is excellent for me...
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top