Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[General] SD card problem , the card not detected

Status
Not open for further replies.

Tareq Domi

Junior Member level 2
Junior Member level 2
Joined
Nov 16, 2014
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
167
hello guys ,

i have Trancend SD CARD 16 GB .

well this card was working normally , whatever which device i use ( laptop , camera , mp3 reader etc )
suddenly , i have no idea what happened to the card .
i plugged the card into the camera and a message box was appeared " no card detected " !!
i took the card and plugged it to my laptop through the SD port , same thing unfortunately .

but when i use card with the USB SD reader it works !! and i can access the card and do any process inside the card .
this method works at rate of 3 success out of 5 tries .

some says that there is an error format with the card , but i am sure that the card is already formatted to the default FAT32 .

do you have any idea ?
 

i think Trancend has a program named jet flash or some thing like that.
some of friends could repair their usb flash disks with this program(its online ).
try that maybe be effective.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top