Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
for safety reasons the dc injection brake must be energized after the main contactor is de-energized and only for a few seconds, the injected current should flow in two phases only. I have an schematic that uses one scr and one diode for this issue, if you are interested please send e-mail.