Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

SBC based on Atmel AT91SAM9G45

Status
Not open for further replies.

armboard

Newbie level 2
Newbie level 2
Joined
Aug 6, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
china
Activity points
1,317
The AT91SAM9G45 embedded microprocessor is based on the integration of an ARM926EJ-S processor with fast SRAM, and a wide range of peripherals. It is designed to provide a high performance processor solution with a high flexibility for general and multimedia oriented applications.
The internal multi-layer bus architecture associated with a multi-port DDR2, a 32-bit External Bus Interface and 64 KBytes of internal SRAM allows the SAM9G45 to sustain the high bandwidth required by its high speed peripherals. The AT91SAM9G45 power management (APMC) features an efficient clock gating which, associated with the ARM926EJ-S low power modes, greatly reduces power consumption under all conditions of use.

To reduce the overall system cost, the AT91SAM9G45 integrates many hardware peripherals such as High Speed (480 Mbps) USB Device and Host with transceivers, a 10/100 Mbps Ethernet controller, a High Speed Multimedia Card interface, an LCD controller supporting STN and TFT displays up to 1280*860, a camera interface and several communication peripherals such as USARTs, Serial Synchronous Controllers and Two Wire Interface.
All these peripherals are DMA oriented, reducing the CPU overload.

The AT91SAM9G45 development board upcoming releases, please pay attention to the latest information on our website.
other products can be found here.
**broken link removed**
**broken link removed**
**broken link removed**

Embest Info&Tech Co., LTD. (China HQ)
Room 509, Luohu Science Building
#85 Taining Rd., Shenzhen, Guangdong
China 518020
Tel: 0086-755-25635656, 25636285
Fax: 0086-755-25616057
Sales Email: market@embedinfo.com or embest1sale1@yahoo.com
Support Email: support@embedinfo.com or EmbestEmbest@yahoo.com
**broken link removed**
 

Good board, and i find another AT91SAM9G45 board, it support 9 serial port, 2 NET, 2 USB HOST, 9ADC, and so on.
Only 99USD.
See more product ino:**broken link removed**
sbc_sam9g45_size.jpg
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top