Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

S7 communication Cable

Status
Not open for further replies.
A

Ahmed Waleed

Junior Member level 1
Joined
Oct 15, 2006
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,403
s5 communication cable

ear All,

I'm having a problem with communicating the S7-200 PLC with PC because i don't have the communication cable and it's still expensive for me to buy.
Have anyone any schematic for this cable?

Note:
PLC communication port is RS232...I tried to use old S5 cable but it didn't work because it uses another communication protocol.

Any Ideas?

Thanks in advance

Ahmed
 

communication cable for plc

Hello!

Look at this topic and you will find the schematics.

Best regards!
Venix
 

s7 communication

It's not a good idear to connect s5 cable or other wrong cable to the PLC.
this may destory the PLC communication port.

It's not a good idear to make the cable by youself too,because you are not professional in it.

you can buy cheap and professionally replacement cable from here:

http://www.elec-intro.com
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top