Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RTL compiler using Faraday-90nm library

Status
Not open for further replies.
K

konstan

Newbie level 1
Newbie level 1
Joined
Dec 13, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,287
Hi everyone,

I am using Faraday-90nm library. My lib_search path for tcl file is /Cadence/libraries/Faraday-90nm-Faraday90nm-SP/Design-Kits/2010/fs0a_a//2010Q4v2.1/GENERIC_CORE/FrontEnd/synopsys/synthesis and the target library is fs0a_a/generic_core_ff1p32vm40c.lib. The verilog file is a accu.v (accumulator). I am using the gui interface but when i run the tcl file my gates are unmapped. What is wrong? Am I using wrong target library?


Thank in advance,

Konstan
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top