eoncu
Junior Member level 1
- Joined
- Feb 18, 2009
- Messages
- 17
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,392
Hi all,
I am trying to design a third order chebyshev edge coupled bandpass filter. The center frequency of the filter is 6.2 GHz with a 10% fractional bandwidth.I manufactured the filter and measured it with network analyzer.The passband is fine. But the upper skirt of the filter has ripples on it. It is not a straight line.But the lower skirt of the filter is normal.No ripples on it. I simulated the filter by using AXIEM. And i didint see any ripples on the skirts of the filter. I repeated the calibration of the network analyzer several times and checked the parameters of the filter on the manufactured board.
Anyone has an idea about itŞ
Thank you very much....
I am trying to design a third order chebyshev edge coupled bandpass filter. The center frequency of the filter is 6.2 GHz with a 10% fractional bandwidth.I manufactured the filter and measured it with network analyzer.The passband is fine. But the upper skirt of the filter has ripples on it. It is not a straight line.But the lower skirt of the filter is normal.No ripples on it. I simulated the filter by using AXIEM. And i didint see any ripples on the skirts of the filter. I repeated the calibration of the network analyzer several times and checked the parameters of the filter on the manufactured board.
Anyone has an idea about itŞ
Thank you very much....