vinodstanur
Advanced Member level 3
- Joined
- Oct 31, 2009
- Messages
- 751
- Helped
- 114
- Reputation
- 234
- Reaction score
- 114
- Trophy points
- 1,333
- Location
- Kerala (INDIA)
- Activity points
- 7,054
Hi I wan't to control around 100 RGB led (not an LED matrix) and need to obtain different colours. Now I am trying the multiplexing by switching the common anode of LED using a ring counter and applying the 3 channel PWM from MCU.
But for me, I cannot sacrifice the LED brightness, I want maximum brightness. Also multiplexing the PWM channels is not working properly when the pwm duty cycle is low. So I searched and found PWM controller which can control 48 pwm channel (https://www.linear.com/product/LT8500).
Any suggestions?
But for me, I cannot sacrifice the LED brightness, I want maximum brightness. Also multiplexing the PWM channels is not working properly when the pwm duty cycle is low. So I searched and found PWM controller which can control 48 pwm channel (https://www.linear.com/product/LT8500).
Any suggestions?