RFPA design simulation PSS Vesus QPSS

Status
Not open for further replies.

whlinfei

Member level 2
Joined
Dec 31, 2008
Messages
48
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,658
Hi,

I am trying to simulate RFPA using spetreRF.
I understand that there are two PSS simulation method. PSS and QPSS.
since QPSS does not assume of periodicity, does it mean that it is more accurate than PSS?

Thanks.

Best Regards,
whlinfei
 

You will use PSS for PA's..
Or Harmonic Balance..
 

Re: RFPA design simulation PSS Vesus QPSS

I understand that there are two PSS simulation method. PSS and QPSS.
Completely wrong.

PSS is an expansion by single frequency basis while QPSS is an expansion by multiple frequency bases which have no common divisor frequency each other.

Generally, only one frequency is involved for PA application.
So PSS should be your choice.

See The Designer's Guide Community Forum - Switched capacitor circuit noise simulation

You will use PSS for PA's..
Or Harmonic Balance..
Wrong.

HB is one of analysis method for "PSS".
See my appends in https://www.edaboard.com/threads/194649/

In Cadence Spectre, HB-PSS and Shooting-Newton-PSS are available as "PSS" analysis.
In Cadence Spectre, HB-QPSS and Shooting-Newton-QPSS are available as "QPSS" analysis.

In Agilent ADSsim, only HB-PSS is available as "PSS" analysis.
In Agilent ADSsim, only HB-QPSS is available as "QPSS" analysis.

In Agilent GoldenGate simulator, Harmonic-Balance, Time-Shooting and Time-Balance algorithms are available as "PSS" analysis.
In Agilent GoldenGate simulator, only Harmonic-Balance algorithms is available as "QPSS" analysis.

In Synopsys HSPICE, HB-PSS and Shooting-Newton-PSS are available as "PSS" analysis.
In Synopsys HSPICE, only HB-QPSS is available as "QPSS" analysis.
 
Last edited:
Status
Not open for further replies.

Similar threads

Cookies are required to use this site. You must accept them to continue using the site. Learn more…