vanskee
Itzikhaim ,
See this link , The spec for your tag
http://www.gaorfid.com/index.php?ma...id=300&zenid=be89a567f7713b18891c13749a69dcda
UHF 865 MHz. Butterfly EPC RFID Tag – Passive
Model: 115002
Type: Contactless Read/Write
Operating Frequency: EU (865 ~ 868 MHz.) (UHF-Ultra High Frequency)
Capacity: 96 bit EPC, 128 bit total
Data Coding Type: ASK
Common Usage: Supply Chain, Logistics, Pallet labels, Hanging labels
Standard Deployment: Corrugated cardboard cases, plastic bottles
Tested Read Range:
up to 6 M
Multi-Detection: No
Size: 35mm x 15mm
Material: Opaque matt paper 79
Color: White
Compliance: IC ST XRA00
Regulatory Specifications: EPC Class 1 Gen 1
Operating Specifications: Waterproof and dustproof
Resistance to immersion in salt water, alcohol, oil, 10% HCL,
Shock – Dependant on packaging
Vibration – Dependant on packaging
Temperature – Storage –40°C to +85°C
- Operating -25°C to + 70°C
Looking at a Tag we cannot say which protocol is there in the chip. . To know the type of protocol used we need datasheet.
Also different manufacturers can use same tag chip for different Tags (antennas).
Also most UHF tags now support EPC Global Gen 2. Some Leading manufactures that I came across are given below.
http://www.upmraflatac.com/
**broken link removed**
**broken link removed**
http://www.vanskee.com/
http://www.gaorfid.com
Hitachi, Philips, Ti etc too manufacture tags as part of their products
**broken link removed**
Regards
GV