Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
GND and VCC should be clear.
MOSI, MISO, SCL also.
CE0 is the chip select for the SPI interface. Connect it to a PIC output port.
RST is the reset pin. If you need the reset function then connect it to a PIC output port.
INT is the interrup out of RC522. If you need it connect it to a PIC interrupt input port.