Anybody knows cheap IC/technology for buiding
RFID or transponders? There are a lot of companies that buid RFID, but I still search for one that can provide samples or small cantities (not thousants).
Please give me some info.
Thanks
*****************************************
Please don't reply unless you have useful information to add on this post.Thanks
Any other replies are always welcome via PM.
Do you want 120Khz, 13.56Mhz or 2.45Ghz transponders?
You can probably get some TI or MicroChip tags in small quantities. The TI 13.56Mhz with the 50mm x 100mm coils will work out to about 1 meter. Philips also might be able to help.
On 2002-02-12 21:49, gassnico wrote:
you can see INSIDE Contactless technologies
web site :www.insidefr.com
contact me if u want more information !
bye
in french if possible
how much transponder ic do you need? I can consider supplying in "flip chip" strap in module level with 2 pads for soldering antenna if you want. However, small MOQ still must apply, perhaps in terms of 1kpcs of common widely available chip such as Icode or my-d. I'm in Asia, so thailand is still fine for 1 brother who asked.
Do PM me for detailed discussion. Let me know your chip type, qty and target price. I'll offer you my best price if its my common production chip type. Of course if the chip required is of lesser utilisation or demand, then cost would be higher.
Im wotking n RFID tags as my final project. I want to develop such a tag that can be embeded within student ID cards. Any sugession about design is appreciated