Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RF Microwave Tools - part 5 ( Phase-locked loop designer)

Status
Not open for further replies.

odyseus

Advanced Member level 4
Joined
Dec 31, 1999
Messages
115
Helped
6
Reputation
12
Reaction score
4
Trophy points
1,298
Location
Cold & Wet Europe!
Activity points
1,225
rf microwave tools

But surely haven't just effectively listed the current downloads from RFGlobalent??

Wouldn't it have been easier to point to the 'download library'? just a thought
 

crono

Member level 3
Joined
May 1, 2001
Messages
59
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
766
rf cascade workbook

Robin Hood Post sorted:

Diode Model Parameter Extraction from Manufacturers' Data Sheets
http://rf.rfglobalnet.com/downloads/9705-1.pdf

PIN Diode Model Parameter Extraction from Manufacturers' Data Sheets
http://rf.rfglobalnet.com/downloads/9708-1.pdf

Displays RF power and voltage relations
http://rf.rfglobalnet.com/downloads/dbm.zip

Either an AC network analysis or RF design tool
http://rf.rfglobalnet.com/downloads/network.zip

Phase-locked loop designer
http://rf.rfglobalnet.com/downloads/pll.zip

Wireless RF Performance Evaluator for WIN3.11
http://rf.rfglobalnet.com/downloads/rcalc313.zip

Single/multilayer coil designer
http://rf.rfglobalnet.com/downloads/rf-coil.zip

Radio Propagation Calculator
http://rf.rfglobalnet.com/downloads/rfprop.zip

Radio-frequency design program
http://rf.rfglobalnet.com/downloads/rfs.zip

Basic source text file for new FCC RF Safety guidelines
http://rf.rfglobalnet.com/downloads/rfsafety.bas

RF CAE Tools
http://rf.rfglobalnet.com/downloads/rftbox.zip

RF design tools
http://rf.rfglobalnet.com/downloads/rftool1.zip

Smith-chart program
http://rf.rfglobalnet.com/downloads/smithcht.zip

RF / IF Bandpass filter circuit & coil design program
http://rf.rfglobalnet.com/downloads/tunekit2.zip

radialwg.m is a MATLAB program that calculates the losses in a radial waveguide as a function of radial distance. Needs MATLAB ver4.0 or later.
http://rf.rfglobalnet.com/downloads/radialwg.m

In this MATHCAD7 file, Betty Boop demonstrates low pass, high pass, bandpass and band notch filtering algorithms based on raised cosine transfer functions

in the frequency domain. These may be applied to both real and complex (e.g. I+jQ) time sampled data. A simple cosine based window function is also included

to demonstrate amplitude resolution improvement when slightly non periodic signals are processed. Uploaded by the author, Ian Scott.
http://rf.rfglobalnet.com/downloads/filter.mcd

This program is written to provide an ease in the quasi-static analysis/synthesis of SYMMETRIC CPS lines based on conformal mapping method. It is able to

take care the finite thickness of the dielectric used and provides the option of including the effect of metallization thickness.
http://rf.rfglobalnet.com/downloads/Ascps11.zip

Arpeggio is an advanced Time-Domain Full-Wave Electromagnetic simulator. It solves the Maxwell Equations in time domain and find the desired frequency

quantities via Fourier Transform.
http://rf.rfglobalnet.com/downloads/arpeggio.zip

A tool created to assist RF designers in making fast and accurate calculations for all essential capacitor performance parameters
http://rf.rfglobalnet.com/downloads/quickcalc.exe

This software calculates exact resistor values for PI, Tee, and balanced networks. Uploaded by James Phelps Jr.
http://rf.rfglobalnet.com/downloads/attenuator.xls

This program calculates the number of turns needed for a given inductance.
http://rf.rfglobalnet.com/downloads/coil.exe

Coil calculator
http://rf.rfglobalnet.com/downloads/coilcal.zip

EasySpan for Windows can store, display and manipulate spectrum analyzer data from a variety of IFR products. The software serves as an excellent

documentation tool for many applications.
http://rf.rfglobalnet.com/downloads/AC1009WD.EXE

Convenient collection of engineering equations, conversions and references. Math tables, standard resistor values, periodic table, SAE & metric bolts,

solder types, filter equations, coax cable specifications and many more. Over 150 windows. Uploaded by Kirt Blattenberger, the copyright owner.
http://rf.rfglobalnet.com/downloads/eeref15.zip

This Windows®-based Microwave Transmission Lines software guides the design and ordering process. The exact component type, waveguide size, flange types,

component dimensions, operating frequency band, and finish can be specified with point-and-click options. Each product is pictured on screen and diagrammed

for your reference. Each rectangular waveguide component and its flanges are identified by a type number that is automatically created as you specify how

each section should be configured. Last updated on 22 March 22, 1999.
http://rf.rfglobalnet.com/downloads/ezguide.exe

It will analyze multilayer transmission lines using the quasi-static variational technique.
http://rf.rfglobalnet.com/downloads/final_zip.exe

TOWAIR may be queried based on a specific set of coordinates, elevation and overall height criteria to calculate whether an antenna structure under 60.9

meters (200 feet) will penetrate the slope for nearby airports.
http://rf.rfglobalnet.com/downloads/towar.exe

A utility that draws Bode frequency response plots.
http://rf.rfglobalnet.com/downloads/frqrsp.exe

Gauge calibration and GRER (repeatability and reproducability) software.
http://rf.rfglobalnet.com/downloads/gagetrol.exe

This software calculates the attenuation or insertion loss of Andrew HELIAX coaxial cables.
http://rf.rfglobalnet.com/downloads/ilca210.exe

This software package is a fast, easy system which guides users to the best choices for EMI shielding/grounding and thermal interface materials among

thousands of Chomerics products
http://rf.rfglobalnet.com/downloads/inphorm.exe

Calculation of Intermodulation Products up to 5th Order. Uploaded by Fritz Dellsperger.
http://rf.rfglobalnet.com/downloads/intermod.zip

This program calculates all IntMod's by frequency.
http://rf.rfglobalnet.com/downloads/int-mod.exe

An impedance matching calculator. You specify the real and imaginary values for the source and load, specify the frequency of interest, and LCMatch

calculates all possible two element matching networks, (LC, CL, CC, LL).
http://rf.rfglobalnet.com/downloads/LCMatch.exe

PC board designer and line simulator
http://rf.rfglobalnet.com/downloads/linesim.exe

Mathcad: resonance
Calculates resonant frequency of a housing partiall filled with a dielectric material. Uploaded by the author, Evan Kurtz.
http://rf.rfglobalnet.com/downloads/MicrostripHousingResonances.mcd

This program calculates mixer intermodulation products upto 5th order and displays graph in amplitude vs. frequency. Use the amplitude level as a guide

instead of absolute spec. The program is written in Microsoft Excel 97. Last updated in March 2000
http://rf.rfglobalnet.com/downloads/mix_spur_ana_rev_1_1.xls

MultiMatch is a software package which allows you to design state-of-the-art, first-time-right RF and microwave amplifiers (class A, B) in an integrated

environment. MultiMatch microLite is a lumped-element impedance-matching utility (limited to three elements maximum).
http://rf.rfglobalnet.com/downloads/mm_uli.exe

Lotus 1-2-3 worksheet to calculate the path of a microwave.
http://rf.rfglobalnet.com/downloads/mwpath.exe

PathLoss
This program calculates path loss.
http://rf.rfglobalnet.com/downloads/pathloss.exe

The PowerAnalyst plots and saves Voltage, Current, Power, Vars, Phase Angle, Distortion, Frequency, Volt-Amperes, and Power Factor.
http://rf.rfglobalnet.com/downloads/power.zip

Receiver Simulator
In addition to being a tool for the design of communications receivers, this program might be useful as a tutorial on some of the aspects of receiver

design; it includes explanations and definitions that are probably more detailed than the average user might require. This program should run under Windows

'95, or later. Manual in .doc is included. Uploaded by the author in August 2000.
http://rf.rfglobalnet.com/downloads/receiver_simulator.zip

Receiver Workbook
Cascade budget calculation spreadsheet for MS Excel. Complete parameter specification including Gain, NF, IP2, IP3, NBW, VSWR, Temperature, Tolerances.

Predefined graphs for all parameters, parts list, DC power budget, A/D converter calculations. Uploaded by Kirt Blattenberger, the copyright owner. Updated

in August '98. RF Cascade Workbook, an enhanced version of Receiver Workbook is also available for download on the site.
http://rf.rfglobalnet.com/downloads/rxw.zip

RF Cascade Workbook
RF Cascade Workbook is a comprehensive set of tools for calculating cascaded parameters using advanced features of the MS Excel spreadsheet program.

Extensive stage-by-stage calculations, graphing of min/nom/max values, and numerous calculators makes this an indispensable tool for the RF system designer.

Uploaded by Kirt Blattenberger, the copyright owner.
http://rf.rfglobalnet.com/downloads/rfcw1p0.zip

RF Match Graphic Impedance Calculator Version 6
This graphic impedance calculator can be
used to match sources to loads with networks made with impedances, inductors, capacitors, transmission lines, stubs and transformers.
http://rf.rfglobalnet.com/downloads/rfmatch6.zip

RF Project Workbook features MS Excel worksheets for project scheduling (Gantt Chart style), parts lists and procurement tracking, and system power supply

requirements. Uploaded by Kirt Blattenberger, the copyright owner.
http://rf.rfglobalnet.com/downloads/rfpw1p0.zip

RF System Calculator

This is a excel spreadsheet that analyzes cascaded stages in Receivers and Transmitters. The cascade analysis includes Noise Figure, Gain, intercept point,

power input/output, SNR (in a given bandwidth), etc. A main signal can be present as well as a pair of interfering signals for analyzing off-channel IM3

rejection simultaneously. Simple AGC functionality is included. Updates are available at
http://home.rochester.rr.com/lascari/rfsyscalc.zip.
Uploaded by the author, Lance Lascari.
http://rf.rfglobalnet.com/downloads/rfsyscalc.zip

RFC
An impedance calculator for RF design engineers.
http://rf.rfglobalnet.com/downloads/rfc_15.exe

RFCAD
Several RF CAE Tools
http://rf.rfglobalnet.com/downloads/RFCAD.ZIP

RFPROP Version 1.03
A Windows propagation calculator for the transmission path between an RF transmitter and a receiver. It is aimed mainly at free-space and space-wave

applications, such as are encountered in VHF, UHF and microwave communications, and also in satellite communications. Updated June 24 1998.
http://rf.rfglobalnet.com/downloads/RFP103.zip

RFS
A program for Broadcast Engineers. Inculdes utilities for antenna design, frequency analysis, and circuit design.
http://rf.rfglobalnet.com/downloads/rfsv202.exe

SCHART
Smith Chart impedance matching program. Starting with any complex load impedance, select any type of matching network, choose a component value(s), then the

program will list your new impedance.
http://rf.rfglobalnet.com/downloads/schart.zip

Smith Chart
Advanced Smith Chart with S-Parameter import/export, stability-, gain- and noise-, Q- and VSWR-circles. Last updated in July 2000. Uploaded by Prof. F.

Dellsperger.
http://rf.rfglobalnet.com/downloads/smith_v191.zip

Smith Charting with Stability and Noise Circles
It charts stability and noise circles.
http://rf.rfglobalnet.com/downloads/schrt.exe

Sonnet Lite
Sonnet Lite is based on the proven Sonnet em® Suite which is providing EM analysis to hundreds of companies across the globe. Many major manufacturers of

high-frequency components and boards depend on Sonnet to analyze their predominantly planar high-frequency designs from 1 MHz through several THz.
http://rf.rfglobalnet.com/downloads/sl60b.exe

Spectra
Spectra is a FREE software package which allows you to view the spectral content of any time based data sequence. Spectra uses a Discrete Fourier Transform

algorithm to convert time data into discrete frequency data, and then scales the discrete frequency data to generate the magnitude and phase of the

frequency spectrum
http://rf.rfglobalnet.com/downloads/sp_v2.exe

A breakthrough for simulation and analysis of RF and microwave circuits. Providing both linear and nonlinear circuit simulation, Spectre/XL uses an enhanced

harmonic balance algorithm to accurately analyze circuits that are "too tough for SPICE".
Spectre/XL for MS Excel 5.0
http://rf.rfglobalnet.com/downloads/dsprf5.zip
Spectre/XL for MS Excel 7.0
http://rf.rfglobalnet.com/downloads/dsprf7.zip

Spur Search
http://rf.rfglobalnet.com/downloads/spur.zip

SPview 1.20
SPview is an S-Parameter toolset for RF and Microwave engineering. With built in GPIB capabilities, it can capture data directly from Vector Network

Analysers and produce S-parameter files compatible with all major simulators. Built in charting and data manipulation features enable faster circuit design,

the 2-port functions charts are particularly useful for amplifier designers often removing several measure/simulate cycles.
Version 1.20 now includes built in time domain reflectometry (TDR) functions to post process S-parameter data into distance to fault charts, a new VSWR

chart, the ability to merge data files, quick capture mode and an updated interface. Last updated in July 2000.
http://rf.rfglobalnet.com/downloads/spsetup120.exe

Trans-Tech Resonator and Coax Design Program
http://rf.rfglobalnet.com/downloads/tranT.exe

Transmission Line Calculator
Analysis/Synthesis of various transmission line structures. Uploaded by Fritz Dellsperger
http://rf.rfglobalnet.com/downloads/line.zip

Transtech
Windows-based CAD and Transtech parts selector guides for dielectric resonators
http://rf.rfglobalnet.com/downloads/transtek.exe

ViPEC-2.00/LineCalc for Windows
http://rf.rfglobalnet.com/downloads/linecalc-1_00_win.zip

WaveFormer Pro v4.0
It is the first EDA tool to incorporative Interactive Simulation (HIS) technology
http://rf.rfglobalnet.com/downloads/waveformer.exe

ViPEC is a powerful tool for the analysis of high frequency, linear electrical networks. It takes a text based description of the electrical network and an

analysis is performed in the frequency domain. The output is in the form of 2-port parameters (S, Y or Z) with results presented on a user defined grid and

Smithchart. It can also be used to compute the input and output impedance/admittance as well as amplifier stability factors (Linvill & Stern).

ViPEC for Linux
http://rf.rfglobalnet.com/downloads/vipec-static-1_07_tar.tar
ViPEC for Windows 95
http://rf.rfglobalnet.com/downloads/vipec-1_00_win.zip
ViPEC-2.00 for Windows
http://rf.rfglobalnet.com/downloads/vipec-2_00_win.zip





<font size=-1>[ This Message was edited by: crono on 2001-11-22 18:42 ]</font>
 

BigBoss

Advanced Member level 5
Joined
Nov 17, 2001
Messages
4,832
Helped
1,465
Reputation
2,928
Reaction score
1,312
Trophy points
1,393
Location
Turkey
Activity points
29,157
pll.zip

For PLL's go to my directory. DL the pll.zip file and see how is the plls' magic world
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top