Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Required: Lift (elevator) control card operation manual

Status
Not open for further replies.

ahmad_abdulghany

Advanced Member level 4
Advanced Member level 4
Joined
Apr 12, 2005
Messages
1,206
Helped
102
Reputation
206
Reaction score
22
Trophy points
1,318
Location
San Jose, California, USA
Visit site
Activity points
11,769
Hello,

I am looking for any possible diagrams, data sheets or operations manual for the following lift (elevator) control board:

ZENER GMV-V-101-2
IMG-20140623-WA0003.jpg

Thanks a lot in advance..

Regards,
Ahmad
 

I think you will have to contact the manufacturer for information. It is quite possible it is designed or adapted for a very specific location and only generic information is available.

Brian.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top