Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Request: Service Manual for Hitachi CM802ET Monitor

Status
Not open for further replies.

FoxyRick

Advanced Member level 4
Joined
Jan 8, 2004
Messages
1,249
Helped
321
Reputation
640
Reaction score
277
Trophy points
1,373
Location
England, UK
Activity points
12,979
Hitachi CM802ET is a 21 inch PC monitor, about 6 years old. It has developed a fault somewhere that causes a relay to click and alter the display width. Probably an easy fix, if I could get a manual...

Cheers,
FoxyRick.
 

Hope this helps. Without I may be able to get an exact service manual with the chassis number if this is not for your chassis.
 

exactly the same problem here.the relay fails to open/close and the horizontal dimension is small.if you kick start the relayall going back to normal
i suspect a bad weld on the relay contacts.
if you discover anything else please inform me too.
thank you in advance
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top