Remote controlled Fan regulator

[agbesi]

I am not using a microcontroller but a 555 timer as a monostable and a decade counter 4017B together with an opto-isolator NTE3042 and triac BT136.

 

[wp100]

Hi,

You need to post your circuit diagram .....

 

[sahu]

I am not using a microcontroller but a 555 timer as a monostable and a decade counter 4017B together with an opto-isolator NTE3042 and triac BT136.

i think u want microcontroller based Remote controlled Fan regulator ? i am right ?

 

[agbesi]

I attached the circuit diagram

 

[sahu]

I attached the circuit diagram

circuit diagram not clear....

 

[coolmirza143]

I am not using a microcontroller but a 555 timer as a monostable and a decade counter 4017B together with an opto-isolator NTE3042 and triac BT136.

why u are using 555??? Make it like this .... <<< uC_____MOC________BT136>>> use PWM and set firing angle of BT 136....

if u didn't use MOC then u have to use a zero crossing detector! MOC series have built in Zero Crossing Setup..... use following circuit...

 

[agbesi]

I have attached a new circuit diagram

 

[prmurthy]

What is your problem. The circuit is from EFY and it works well. All these published circuits are tested before printing. I don't see any problem in the circuit.

 

[mishra12]

this circuit is tested i don't see any problem in that circuit what is your problem now? you need to connect parts now cheers

 

[Praful]

Does anyone had a source code for Remote Controlled Fan Regulator With Timer from hamradioindia....