Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Regulator - 5V fixed

Status
Not open for further replies.
M

mohana_s14

Junior Member level 1
Joined
May 9, 2011
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,388
Hi,
I am designing 5V fixed powersupply. For that, regulator LM7805 or LM1117-5V which is best?. What is difference b/w 7805 & 1117?. Which is having less failure and cost effective?
 

1117 is a low dropout regulator. Which means that you can have an input voltage of atleast 6.2V and still get 5V output. With a 7805, you need minimum 7V to get the 5V.

The load capability is also slightly different.
 

I always buy products from large Name Brand manufacturers because they are very reliable, not cheap junk from unknown or little manufacturers.
Some parts sold cheaply on e-bay are fakes that do not even work.
 

The 7805 has an output current of 1A, so power delivered will be 5 Watts.

Whereas in the case of 1117-5, it has an output current of 0.8A. So the power delivered will be 4 Watts.

Calculate your power requirement and chose the voltage regulator accordingly.
Both are reliable voltage regulators and have a good load regulation.
 

Thanks, i am decided to use 7805.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top