[SOLVED] Register space addressing in Xilinx JESD204

[samg]

I am a beginner with both AXI and JESD204. The address for control registers in the JESD204 IP is supposed to be a 32bit address but Xilinx documentation mentions address offset as 12bit values like "0x008", "0x00C".

Are we just supposed to add zeroes in front when using these addresses for axi-lite read/write transactions?

Any help is appreciated.

 

[dpaul]

As a generic comment, Real address = Base address + Offset value
Just add it to the base address to get the 32 bit value.