Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Regarding TFT LCD Interface Type RGB or SPI

Status
Not open for further replies.

sakibnaz

Full Member level 3
Joined
Jul 6, 2008
Messages
157
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,298
Activity points
2,707
Hi All.

We are doing a project where we need to use a 3.5" TFT (Capacitive Touchscreen. This will be used with DSLR Camera product where we need to show the Camera Live View as well as Picture to the TFT LCD.

We are looking for several TFT LCD with most of them with RGB and SPI interface. Can anyone advise which interface type will be best to choose either RGB or SPI for our application.

This is very critical choose in our development as for RGB Type we need to choose different CPU Core Module.

Thanks in advance.

Regards.
 

KlausST

Super Moderator
Staff member
Joined
Apr 17, 2014
Messages
20,800
Helped
4,496
Reputation
9,004
Reaction score
4,563
Trophy points
1,393
Activity points
137,345
Hi,

More informative than physical size (3.5") is
* the resolution in pixels
* the color depth
* the frame rate
This tells you about bandwidth of the interface.

RGB interface will have higher throughput, thus I'd prefer it for camera view.

Klaus
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top