vinothtnt
Junior Member level 1
hi,
I am using PIC 16F877A for my project. In this i am using the rising edge concept.
for this i used the external interrupt pin RB0/INT. while i make a prg i made mistakes while configure the registers tats the INTCON and OPTION_REG.
So i need the C code or prg concept. I am usingt HITECH C compiler.......
i need this one is very urgent......
Added after 21 seconds:
I am using PIC 16F877A for my project. In this i am using the rising edge concept.
for this i used the external interrupt pin RB0/INT. while i make a prg i made mistakes while configure the registers tats the INTCON and OPTION_REG.
So i need the C code or prg concept. I am usingt HITECH C compiler.......
i need this one is very urgent......
Added after 21 seconds:
vinothtnt said: