Aug 31, 2012 #1 D dhivya34 Junior Member level 1 Joined Aug 7, 2012 Messages 18 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,399 Assume that a certain pin in an IC package is reserved. Then how will the pad corrresponding to that pin be configured..??
Assume that a certain pin in an IC package is reserved. Then how will the pad corrresponding to that pin be configured..??
Aug 31, 2012 #2 B btbass Advanced Member level 5 Joined Jul 20, 2001 Messages 1,896 Helped 438 Reputation 880 Reaction score 288 Trophy points 1,363 Location Oberon Activity points 12,887 It should say in the data sheet whether to leave it not connected or connect it to ground or supply?
Aug 31, 2012 #3 tpetar Advanced Member level 7 Joined Sep 27, 2010 Messages 6,417 Helped 1,713 Reputation 3,456 Reaction score 1,673 Trophy points 1,393 Location Pancevo-Belgrade, Serbia Activity points 37,363 We have this thread earlier, better search existing thread first. Read manufacturers datasheet, they says NC for that pin, this pins are for future usage, but this particular IC what zou have now dont use it. Sometimes (I say "sometimes") this pins can be used for help in heat drainage from IC.
We have this thread earlier, better search existing thread first. Read manufacturers datasheet, they says NC for that pin, this pins are for future usage, but this particular IC what zou have now dont use it. Sometimes (I say "sometimes") this pins can be used for help in heat drainage from IC.