dlonglee
Newbie level 4
Hi All
i have 2 switch one is catalyst 2950 and other are huawei s2300 i want to make redundant link the proablem is that there is no spanning tree instance on huawei switch and but on catalyst 2950 i enable rapid pvst
catalyst 2950 huawei
fast ethernet 0/9 --------------------------> ethernet 0/9
fastethernet 0/10--------------------------> ethernet 0/10
catalyst 2950 automaticaly sense loop and block 0/10 port the problem is that when the other 0/9 is in down then 0/10 is remain in backup and block
i don't want tu run stp on huawei switch because of reason
please help me what i do when one link is goes down other automatically up
i have 2 switch one is catalyst 2950 and other are huawei s2300 i want to make redundant link the proablem is that there is no spanning tree instance on huawei switch and but on catalyst 2950 i enable rapid pvst
catalyst 2950 huawei
fast ethernet 0/9 --------------------------> ethernet 0/9
fastethernet 0/10--------------------------> ethernet 0/10
catalyst 2950 automaticaly sense loop and block 0/10 port the problem is that when the other 0/9 is in down then 0/10 is remain in backup and block
i don't want tu run stp on huawei switch because of reason
please help me what i do when one link is goes down other automatically up
