Redesigning PCB for ProPic 2 Gold

Status
Not open for further replies.
top2006 pcb

One question on ProPic 2 and IC-Prog
does they support 16F627A/628A 'A' versions?

As far as I know, you need to pull PGM pin to GND (according to IC-Prog page), does ProPic 2 has that features?
 

propic2 gold v2.0

I have read lots about the failure of PropicXP Gold. How it works with standard PCB (without 12C508) but with Gold software? Should I try the older Propic or try this new PropicXP... but I have to program 16F876A!!!

I have also read about the success of ICprog with Propic hardware... hows that?
Which version of ICprog should I download to program 16F876A?
 

12c508 do propic 2

thanks
clone picpro
**broken link removed**
 

propic2 .hex

I opened this Eagle Files and there is two missing connections, comparing the Eagle schematic with the original one:
1. Connection between Data signal and ZIF socket pin 15.
2. Connection between Clock signal and ZIF socket pin 16.

Why this version doesn't have those connections? Is it a mistake or is there some reason for that?
 

schema propic

Hmmm... very interesting. I build a copy of original propic2, but not have hex for vdd control, a long time I search for this, finally I found in this forum. Thank's!
 

pro pic gold 2.9

Hello All

Please I have a question regarding the potentiometer. It's written that it's adjusted for a 5volt output at the second opamp. Under what conditions should I adjust it?
i.e, when I just connect the power supply to the circuit or simulate programming (write a hex file to the parallel port without an MCU)?

Thanks in advance
 

propic2gold

this programmer is crap

drop kick your efforts

invest in a picall or a chinese top2006 usb or serial
the picall you can get for less than 150 euros
and the top for 70euros

the top covers 56000 devices
the picall a mear 700 or less

the propic a simple few

get a top and its sent direct for maybe some small tax also in your country
https://www.mcumall.com/forum/forum.asp?FORUM_ID=2
some stuff and links
 

propic gold

tray this it is ok.

parts:
. Печатна платка 0231 - 1 бр.
2. U1, U3 78L05 - 2 бр.
3. U2 7407 (ЛП9) - 1 бр.
4. VT1÷VT5 2T3308C - 5 бр.
5. VD1 zener (6.2÷7.5)V - 1 бр.
6. VD2 zener 8.2V - 1 бр.
7. VD3 green- 1 бр.
8. VD4, VD8 red ф3 - 2 бр.
9. VD5÷VD7 1N4148 - 3 бр.
10. C1, C3, C4 100nF - 3 бр.
11. C2 100µF/25,35V - 1 бр.
12. C5 (47÷150)nF - 1 бр.
13. R1 2.2kΩ - 1 бр.
14. R2, R7, R14, R17 (20÷33)kΩ - 4 бр.
15. R3, R6, R11÷R13 4.7kΩ - 5 бр.
16. R4, R5 560Ω÷1kΩ - 2 бр.
17. R8, R9, R15, R16, R18, R19 10kΩ - 6 бр.
18. R10 (2÷4.7)kΩ - 1 бр.
19. К1 - 1 бр.


from here:https://hobby.neomontana-bg.com/
in BG


and here is more:https://www.constructor.bg/mk/Programator.htm
 

pic12c508p pic12c508a difference

THE PCB FOR THE DOUBLE SIDED BOARD HAS IT BEEN MIRRORED OR I HAVE TO MIRROR THE TOP BEFORE PRINTING, SO THAT I CAN GET A GOOD ALINGMENT?
 

db-25 pcb

Here's a propic2 programmer db25 download attachment. but I need a db9 propic2 programmer can some share a pcb layout of the propic2?
thanks

best regards,
glenndr_15
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…