BMWE
Member level 2
Hello,
I want to simulate the following situation:
I transmit data in 2K, encode it with turbo code (1/2).
Then I expand the data in the following way: each coded bit is repeated some number of times. Let say I have A=[1 0 0 1 0] and the repeat factor is 4, then I'd receive B=[1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0].
This B sequence I modulate using MSK.
So the Rin=2K, Rcoded=4K, RMSK
Now in the receiver side, I want that out of the MSK receiver will have rate of RMSKreceiver=4K (i.e it will execute also the shrink of the data rate). I can't execute the shrink separately.
Then I have turbo decoder and the output of the bits.
Can somebody please assist me with the MSK receiver?
I want to simulate the following situation:
I transmit data in 2K, encode it with turbo code (1/2).
Then I expand the data in the following way: each coded bit is repeated some number of times. Let say I have A=[1 0 0 1 0] and the repeat factor is 4, then I'd receive B=[1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0].
This B sequence I modulate using MSK.
So the Rin=2K, Rcoded=4K, RMSK
Now in the receiver side, I want that out of the MSK receiver will have rate of RMSKreceiver=4K (i.e it will execute also the shrink of the data rate). I can't execute the shrink separately.
Then I have turbo decoder and the output of the bits.
Can somebody please assist me with the MSK receiver?