Question on waveguide filter design

Status
Not open for further replies.
S

saryee

Member level 2
Joined
Sep 4, 2003
Messages
53
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,286
Activity points
469
Hi, dear friend,

Please refer to the attached picture.

In the waveguide filter design, I've already figured out the values of L1 to L5, B01 to B56. But how should I get the corresponding numbers and diameters of the posts?

Thank you very much!

Saryee (yxc0458@yahoo.com)
 

use the ansoft desinger to do it
 

springf2000 said:
use the ansoft desinger to do it
Click to expand...

Yes. We can use any CAD tool to simulate this structure. But how do we get the initial dimensions?

Thanks!
 


See the waveguide book for specifics if required.

Dimensions are calculated in terms of impedance and electrical length(freq. depedent). Use any tool are you said it. You already know values C,L

Then pick a waveguide kind (example coax) and make these impedances in electrical(also physical) length to coax in particular.

There are tools. I dont know for ansoft designer but for ADS use LineCalc. See picture attached.


thanks.
 

If you want to get results with more accuracy,make reference to Harrington' book:
Time-Harmonic Electromagnetic Fields,or use moment of method.
I'm also have some research to it.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…