Sedat-G
Newbie level 6
- Joined
- Aug 5, 2010
- Messages
- 11
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 1,283
- Location
- East Lansing MI
- Activity points
- 1,371
Hello everyone,
I am trying to understand the concept of SD-16 convertors and here is my question. If I am using SD-16 and internal voltage reference generator (1.2V), this means my sampling scale range corresponds to 0.6V if the microcontroller's gain is set to 1. So if the input of the ADC is more than 0.6V (=0xFFFF) which is out of the range, would the ADC convertor do the comparison?
I am trying to understand the concept of SD-16 convertors and here is my question. If I am using SD-16 and internal voltage reference generator (1.2V), this means my sampling scale range corresponds to 0.6V if the microcontroller's gain is set to 1. So if the input of the ADC is more than 0.6V (=0xFFFF) which is out of the range, would the ADC convertor do the comparison?