Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Question about FrostBeamformer

Status
Not open for further replies.
S

Spaceman4

Newbie level 1
Newbie level 1
Joined
Jan 27, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,287
Hi All, I am new around here.
I using frost beam former matlab code as part of phased tool box.
I have conducted an experiment with microphone array of 8, spacing of 3cm with noise [4.4-4.6KHz] and signal [5-5.2KHz].
The steering direction is 0 degrees [exactly were the signal is located].
The noise is 90 degrees to the array.
Due to the fact that the noise and signal have no overlap spectrum, should I suppose to get "infinite" SNR ?

Thanks,
Tamir
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top