buckaroo
Member level 3
- Joined
- Apr 23, 2007
- Messages
- 60
- Helped
- 6
- Reputation
- 12
- Reaction score
- 4
- Trophy points
- 1,288
- Location
- Beijing
- Activity points
- 1,626
Dear All,
For RF receivers with I/Q channel, LNA-->I/Q mixer-->I/Q LPF-->IQ ADC
digital assisted dc offset cancellation(measure ADC output DC offset-->adjust current steering DAC whose output is LPF input, binary search untill ADC +/- output are close)
Now, the question is, I/Q path DC offset are NOT the same, which mean 2 DC offset cancellation are needed, is that so? or just 1 path DC offset cancellation is enough and apply the dcoc result to the other path(e.g, DCOC for I path, apply I path DCOC result to Q path)?
If the former is a MUST, then there will be IQ mismatch due to the different DC operating point for IQ path?
Thanks a lot!
For RF receivers with I/Q channel, LNA-->I/Q mixer-->I/Q LPF-->IQ ADC
digital assisted dc offset cancellation(measure ADC output DC offset-->adjust current steering DAC whose output is LPF input, binary search untill ADC +/- output are close)
Now, the question is, I/Q path DC offset are NOT the same, which mean 2 DC offset cancellation are needed, is that so? or just 1 path DC offset cancellation is enough and apply the dcoc result to the other path(e.g, DCOC for I path, apply I path DCOC result to Q path)?
If the former is a MUST, then there will be IQ mismatch due to the different DC operating point for IQ path?
Thanks a lot!
