Hawaslsh
Full Member level 3
- Joined
- Mar 13, 2015
- Messages
- 164
- Helped
- 5
- Reputation
- 10
- Reaction score
- 7
- Trophy points
- 1,298
- Location
- Washington DC, USA
- Activity points
- 3,422
Hello all,
I have been burned in the past when it comes to relys, so I wanted to ask and make sure my understanding of a particular relay was correct.
I am looking at the **broken link removed**, It is a normally open DC relay.
my question is: can the LED be driven directly from an Arduino (Atmega328) output and would it need a current limiting resistor?
Also, Some relays require a zero crossing in order to fully turn off, Since this is LED driven MOSFET, that isn't the case?
Thanks in advance!
Sami
I have been burned in the past when it comes to relys, so I wanted to ask and make sure my understanding of a particular relay was correct.
I am looking at the **broken link removed**, It is a normally open DC relay.
my question is: can the LED be driven directly from an Arduino (Atmega328) output and would it need a current limiting resistor?
Also, Some relays require a zero crossing in order to fully turn off, Since this is LED driven MOSFET, that isn't the case?
Thanks in advance!
Sami