Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

pss analysis fails in spectre

Status
Not open for further replies.
C

chinito

Full Member level 2
Joined
Jul 5, 2004
Messages
128
Helped
11
Reputation
22
Reaction score
6
Trophy points
1,298
Activity points
1,204
I'm simulating an LNA and pss fails on me. The simulator settings are default ones. I have heard for pss one has to change the tolerance settings. I don't know how and which setting. pls help. Here's the error:

Internal error found in spectre during periodic steady state analysis
`sweeppss-000_pss', during Sweep analysis `sweeppss'. Please run
`getSpectreFiles' or send the netlist, the spectre log file, the
behavioral model files, and any other information that can help
identify the problem to support@cadence.com.
Assertion failed in file `hopss.c' at line 1312.
Assertion failed.


Any help I can get is appreciated.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top