Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Proteus: Virtual Oscilloscope not working quite right.

Status
Not open for further replies.
S

styx1.618

Junior Member level 3
Junior Member level 3
Joined
Oct 1, 2011
Messages
27
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Visit site
Activity points
1,492
hi! Virtual Oscilloscope display in proteus doesn't pop-up when the play button is pressed for the simulation, neither it responds on double-clicking it. Furthermore, Proteus show a warning that "simulation must be paused while measuring". Help plz!!!
 

While simulation is working, right click and choose Digital Oscilloscope, just shown in picture.
Digital Ossiloscope.png
 
  • Like
Reactions: Areeb Iqbal

    A

    Areeb Iqbal

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
I use protues8 and can't find such option -Digital Oscilloscope - when right clicking during the simulation

- - - Updated - - -

what should I do ? !
 

goto 'debug' button on the top, while running simulations, oscilloscope option is down there where you can click it will popup.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top