proteus modeling 3 phase generator
open the dsn file
mouse over the part for 3phase gen
press ctrl z to zoom to the sub sheet
to leave the subsheet press ctrl x
the model is attached so dont untick the hirachy module box
and save design or it will disappear
dsp_attempt_1 marks out of ten 2 deux précise de dix {{for getting the inter phase meters in the right place} 8 points deducted for not getting 240v N to RED phase or any of the other volts correct....}
CHANGE 1:
hahahaha 8p for not gettin the right voltage heheheheh
btw i dont want ur points
its the half voltage because the metre shows rms and there is a failure in the initial design (amplitute = rms*sqrt(2) not amplitute = rms/sqrt(2))
so 1/sqrt(2)*1/sqrt(2)=1/2
im gettin some sleep now cya lata
ok this one is better and i give it 8 out of ten
1 point becouse although you got all the time bang on and all the metering was fine the globals werent and the lib part and model were't compiled with proper presets "made to measure"
1 point becouse the sin theta varient wasn't used with resepct to the offset rail the offset {temperal rail in the center between earth and all } wasnt brocken out the model and assigned a constant with resect to earth { handy if you have an earth leek }
any way your still knowwhere near the 200 points becouse your still using the older version that gives a nice convinient *.707 to a global value....constant
but your number one for now on the 50 points blag
teddy_attempt_1 marks out of ten 6 six précise de dix {4 for getting the timing sort of working and 2 for it running the first time i tried it
{ however 2 marks deducted for not linking the model to the nominal voltage rail and 2 becouse your using the older 50 pont only model only 50 points max for using that one}
the object is too make the best model from the bones you were given and teased with
the best model part lib etc etc wins 200 points second best 150 ...etc...
not the one who only gets too level 2 there is at least 10 things still too do
please note to reuse your topics and flag a change has been made