When I exit Protel 99 SE SP6 ( Full version NOT eval ) using File/Exit I can hear Error Beep, but when I exit using close window "X" everything is OK. What is going on ?
its warning you the desing isnt something
or there is a bad memory call
? with what o/s are you running
you know you need nt4 or win me/98 to run that
xp 2000 sp2-complaines
I use Win98 Second Edition on Pentium III / 650 MHz -384 MB RAM - 20 + 40 GB HDD - NVidia 440 SE Video - The problem exist even when I don't do anything in Protel - just execute Design Explorer / File / Exit without loading any file.
I'm not sure if the OS is an issue other than that it won't installed under Windows ME.
I've never had problems with Protel 99SE running under Windows 2000 SP2 or SP3. I've used it under Windows XP SP1 and no problems. If it ever shows an error you can always save your work then restart the program and continue.
I don't have problems with loading, saving and working with projects - everything is ok! I can save and load again my work - This stupid beep occurs only when I use File / Exit ... All files are saved ok, all projects are closed without problems - workspace is empty so I want to close Design Studio ( File / Exit ) and ... BEEP ...
I'm not sure if the OS is an issue other than that it won't installed under Windows ME.
I've never had problems with P*otel 99SE running under Windows 2000 SP2 or SP3. I've used it under Windows XP SP1 and no problems. If it ever shows an error you can always save your work then restart the program and continue.
i used it with ME no problems {infact less problems} than with 98
"if it ever shows an error....."
i think you miss the point of the topic !!!!
is to find out why it beeps
i personaly think its an open server or perhaps another design is also open and warns its closing it but dosnt need to save
for me it will only work with ME is you install it on Win98SE then upgrade to ME, otherwise the 99SE installer gives a warning about incorrect version of Windows when installing directly to ME.
Secondly, I have never had errors of anykind show up on W2K or WXP, they did show up frequently on Win98 though.
extract the installer for sp6 to give the file
then move them over
as we all realise that installers are o/s dependant
not the app .... mostly
this beep error
sound like a version conflict {the manual mentions this beep with sp2 ... as far as it went in reprint}
try looking on the support site and in the manual again
seee if you can find a note about system beeps
another thing is install direct x latest and update all your mainboard & cdrw if any and especialy the video card firmware AND drivers
if you have never done this to your nvidea
do it and flash the latest nvidea flash from the manufacturer
{use google to find}
update the visual c++ runtime to version 6 runtime
add vb runtime also
you can find all on google using the strings above
could be a firmware problem accesing a video card componet
{for protels splash screens}
i got the problem of once i close the windows with "x" button, illegal operation messagebox prompt out and close the program. this problem only happen once i installed sp6.