Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[General] project doubt about CAN

Status
Not open for further replies.
K

Karthik Pangajatchan

Newbie level 1
Newbie level 1
Joined
Mar 14, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
7
now am working about automotive electronics. in area my doubt is, which is best concept as following concept for developing a prototype
1.Pressure sensor , RADAR sensor, switch with load are interface by using one controller
or
2. pressure sensor is interface with one controller then RADAR sensor, Relay and load are interface with another controller. two controllers are communicate by using a CAN module.
please replay about your idea about this concept.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top