I am using ISIS for schematic design and ARES for PCB design.
I new of both of it, now Im finished draw my Voltage regulator 12V-5V with NO ERC error found and netlist generate OK. But I got from when I transfer it into ARES as attached.
Is there any way to do this? To connect the netlist accordingly.
Kindly help and guide.
The error message means that the footprint (PCB shape) that you have chosen/assigned for the capacitor
has no/or wrong pin numbers assigned to its pads.
The error message means that the footprint (PCB shape) that you have chosen/assigned for the capacitor
has no/or wrong pin numbers assigned to its pads.