Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with the output of a XOR

Status
Not open for further replies.

mohazaga

Full Member level 2
Joined
Aug 18, 2005
Messages
141
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
2,397
Hi
when I design the XOR , the output should be H as 2-inputs are oppsite. The XOR ckt which I sim. , it's output is L when the 2-inputs are oppsite where is should be H? I trace it but I didnot figure out what is wrong? can u help please to figure out what is happend?
thankx
 

rajanarender_suram

Full Member level 4
Joined
Jan 20, 2006
Messages
215
Helped
22
Reputation
44
Reaction score
9
Trophy points
1,298
Activity points
2,375
XOR output

i think u have to remove the base of M5 and M10 to which is shorted to respective sources and connect to gnd, since it may forward bias the drain-base junctions.
 

    mohazaga

    points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top