Pparaiso
Newbie level 1
- Joined
- Feb 18, 2014
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 8
Good afternoon,
After starting transient solver, I got this error "Port 1 is inhomogeneously filled within the first 3 mesh cells.". I've found some solutions proposed here in forum: increasing the number of mesh cells or adjusting the size of my port. But this leads me to a very long simulation time and sometimes my structure is filled by PEC cells.
Note that I'm trying to simulate a stack microstrip antenna in LTE1 band in a cylindrical surface.
I'm sending my file attached.
I can't think in other solutions. I hope someone with more experience can help me in this problem. I would be truly grateful.
Thanks.
After starting transient solver, I got this error "Port 1 is inhomogeneously filled within the first 3 mesh cells.". I've found some solutions proposed here in forum: increasing the number of mesh cells or adjusting the size of my port. But this leads me to a very long simulation time and sometimes my structure is filled by PEC cells.
Note that I'm trying to simulate a stack microstrip antenna in LTE1 band in a cylindrical surface.
I'm sending my file attached.
I can't think in other solutions. I hope someone with more experience can help me in this problem. I would be truly grateful.
Thanks.