xpress_embedo
Advanced Member level 4
Hello!!! Everyone....
Few Days back i started using Microchip USB Firmware Framework, and the strange thing i found is that it is not working with Proteus..
and my Proteus Halts after few seconds, the snap of which is attached below..
While when i load the Pre-Compiled Hex File it works with Proteus..
Now you may think my code is wrong..
But thats not the case because my COde is working with real hardware properly..
Can any one tell me why this is happening.. I am using MPLAB C18 v3.40 Compiler
Few Days back i started using Microchip USB Firmware Framework, and the strange thing i found is that it is not working with Proteus..
and my Proteus Halts after few seconds, the snap of which is attached below..
While when i load the Pre-Compiled Hex File it works with Proteus..
Now you may think my code is wrong..
But thats not the case because my COde is working with real hardware properly..
Can any one tell me why this is happening.. I am using MPLAB C18 v3.40 Compiler