timothyarora
Junior Member level 2
i'm connection aduc841 with maxq3183 for the spi communication between them making maxq3183 as slave. Although i'm getting 8 square pulses in clock and MOSI 0x80 (as send) but i'm not getting miso from the slave.
master and slave are connected as:
MISO conncted to MISO
MOSI connected to MOSI
i want to now what could be the reasons for not coming the MISO signal.
i've also noticed that when i've grounded the slave with master ground then miso signal is in millivolt or if not, it is abrupt signals of 18v . please reply me soon as i need it urgently.
master and slave are connected as:
MISO conncted to MISO
MOSI connected to MOSI
i want to now what could be the reasons for not coming the MISO signal.
i've also noticed that when i've grounded the slave with master ground then miso signal is in millivolt or if not, it is abrupt signals of 18v . please reply me soon as i need it urgently.