jay1691
Member level 2
- Joined
- Jul 22, 2014
- Messages
- 47
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 8
- Activity points
- 345
Hello to everyone,
I designed spice model of HCPL3140 in proteus.
It's not working properly. It gives unexpected output of 0.6V instead of high output.
---------------------
Model properties:
{PRIMITIVE=ANALOG,SUBCKT}
{SPICEFILE=AvagoHCPL3140_MOD.TXT}
{SPICEMODEL=HCPL3140}
{SPICEPINS=A,K,VEE,OP,VCC}
Model is given in below link:
---------------------
Datasheet of HCPL3140 is given in below link:
As per datasheet truth tabel is :
LED ---> OP
ON ---> High
OFF ---> LOW
But when i am applying +5V to led (between pin 2 & 3) then output( pin 6) is 0.6V insted of high.
here i applied +15V to VCC(pin 8) where as VEE(pin5) is GND.
I designed spice model of HCPL3140 in proteus.
It's not working properly. It gives unexpected output of 0.6V instead of high output.
---------------------
Model properties:
{PRIMITIVE=ANALOG,SUBCKT}
{SPICEFILE=AvagoHCPL3140_MOD.TXT}
{SPICEMODEL=HCPL3140}
{SPICEPINS=A,K,VEE,OP,VCC}
Model is given in below link:
---------------------
Datasheet of HCPL3140 is given in below link:
As per datasheet truth tabel is :
LED ---> OP
ON ---> High
OFF ---> LOW
But when i am applying +5V to led (between pin 2 & 3) then output( pin 6) is 0.6V insted of high.
here i applied +15V to VCC(pin 8) where as VEE(pin5) is GND.