satish.ghariya
Member level 1
- Joined
- Jun 25, 2006
- Messages
- 32
- Helped
- 4
- Reputation
- 8
- Reaction score
- 4
- Trophy points
- 1,288
- Location
- Noida/Indore
- Activity points
- 1,602
hi..
i am using sn74ls393n in my adc circuit..clock of 3.3ms is given at pin1 and i am getting outputs as according to data sheet(6.6,13.2,26.4,52.8msec) and 52.8 is given to pin 13 so more output will be (105.6,211.2,422.4,844.8msec).
But this circuit i made is by taken refrence of another circuit which gives diffrent pulses ..and that circuit is working fine, but my circuit is not. i also needed same pulses as old circuit. both circuit are same.
need help..................
satish
i am using sn74ls393n in my adc circuit..clock of 3.3ms is given at pin1 and i am getting outputs as according to data sheet(6.6,13.2,26.4,52.8msec) and 52.8 is given to pin 13 so more output will be (105.6,211.2,422.4,844.8msec).
But this circuit i made is by taken refrence of another circuit which gives diffrent pulses ..and that circuit is working fine, but my circuit is not. i also needed same pulses as old circuit. both circuit are same.
need help..................
satish