sarathsnairpoonjar
Member level 2
- Joined
- Nov 12, 2012
- Messages
- 50
- Helped
- 2
- Reputation
- 4
- Reaction score
- 2
- Trophy points
- 1,288
- Location
- Cochin,Kerala,India
- Activity points
- 1,560
how to design double sided pcb in orcad layout 16.0
Welcome to EDAboard.com
Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
problem creating double sided pcb
- Thread starter sarathsnairpoonjar
- Start date
- Status
kabaleevisu
Advanced Member level 2
- Joined
- Apr 14, 2010
- Messages
- 615
- Helped
- 85
- Reputation
- 170
- Reaction score
- 81
- Trophy points
- 1,308
- Location
- Chennai,India
- Activity points
- 4,507
hi sarath,
if you are new to PCB check this ,it maybe help for you
https://www.edaboard.com/thread206372.html
if you are new to PCB check this ,it maybe help for you
https://www.edaboard.com/thread206372.html
Roger Miller
Newbie level 5
Well, there are two kind of board , single-sided board and double-sided board. Many people prefer single sided board as many problems occur with double-sided PCBs especially from badly placed vias.
I am sharing a link that may be useful for you to understand the technicality.
http://www.youspice.com/ys/singlesidedanddoublesidedboard.3sp?pageNum=1
- Status
