Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

problem based ontransmission line

Status
Not open for further replies.

artipriya

Newbie level 1
Newbie level 1
Joined
Oct 15, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,287
a transmission line of length 50cm with L=10µH/m,c=40pf/m is operated at 30Mhz.what is its electrical length?
 

it's a little trouble to calculate it.
You can divide the length into 10 segments, and setup models, then calculate GD(group delay) or lamda, then you know electrical length.
 

This page helps to answer your question:

**broken link removed**
 

I divided 50cm into 10 segments, each is 5 cm. So use 11 shunting 2pF caps and 10 series 0.5uH inductors.
The system group delay is 2.278ns, so the electric length is 0.068 lamda.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top