pro help please me about this ?

[aloneinthedark]

i have problem with winpic800
i use jdm
that is error writting adress 0x000000
writen 0x1303 read 0x3fff
i have config winpic800 use 16f877a and i don't know why ?:-(
who know , please help, thanks !

 

[john blue]

check is your jdm connected?

---------- Post added at 03:36 ---------- Previous post was at 03:24 ----------

By doing hardware test. Device -> Hardware test. Check also whether you select jdm programmer by Settings -> Hardware -> JDM Programmer. As well as the COM port that you use.

 

[aloneinthedark]

thanks pro for yu'r help, but i have done it before and no effect

 

[malik_zohaib]

then try picpgm. a very good programmer with auto detected features.