Black-Bone
Junior Member level 1
Hi there,
I am working on printed dipole antenna array.
I an new for XFDTD design, and I really need help.
For making understanding, I started to design Microstrip ; one end I put feed component 50 ohms
and put passive load 50 ohms on the other end. The result was as I expected.
After that, I designed a patch antenna at 2.4 GHz and it provided a good agreement compared to the measurement.
But the problem occurred when I was design a printed dipole that mounted on the reflector ground plan.
S11 is almost zero throughout possible frequencies. I would like it to match at 1.9 GHz.
I don't know what's wrong with my design. Anyone can help me I am very appreciate.
I am working on printed dipole antenna array.
I an new for XFDTD design, and I really need help.
For making understanding, I started to design Microstrip ; one end I put feed component 50 ohms
and put passive load 50 ohms on the other end. The result was as I expected.
After that, I designed a patch antenna at 2.4 GHz and it provided a good agreement compared to the measurement.
But the problem occurred when I was design a printed dipole that mounted on the reflector ground plan.
S11 is almost zero throughout possible frequencies. I would like it to match at 1.9 GHz.
I don't know what's wrong with my design. Anyone can help me I am very appreciate.