nerd1234
Newbie
Im trying to print the specific parameter value "aclv_uncorr" from a model in an hspice netlist. How can I do this? Here is what I have tried so far:
*** Netlist ***
.LIB pathname/fets.lib deviceLibName
.subckt deviceLibName d g s b
.ends
X1 drain gate source substrate deviceLibName
.DATA bias vvgate
+ 0.000001e+00
.ENDDATA
vgate gate igate dc vvgate
vigate 0 igate 0
vsource source isource dc 0.0
visource 0 isource 0
vdrain drain idrain dc 0.05
vidrain 0 idrain 0
vsubstrate substrate isubstrate dc 0.0
visubstrate 0 isubstrate 0
.probe DC par(X1.aclv_uncorr)
.print DC par('X1(aclv_uncorr)')
.end
*** Netlist ***
.LIB pathname/fets.lib deviceLibName
.subckt deviceLibName d g s b
.ends
X1 drain gate source substrate deviceLibName
.DATA bias vvgate
+ 0.000001e+00
.ENDDATA
vgate gate igate dc vvgate
vigate 0 igate 0
vsource source isource dc 0.0
visource 0 isource 0
vdrain drain idrain dc 0.05
vidrain 0 idrain 0
vsubstrate substrate isubstrate dc 0.0
visubstrate 0 isubstrate 0
.probe DC par(X1.aclv_uncorr)
.print DC par('X1(aclv_uncorr)')
.end