Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[Pre-P&R] Cells Delay Calculations

Status
Not open for further replies.

ivlsi

Advanced Member level 3
Joined
Feb 17, 2012
Messages
879
Helped
17
Reputation
32
Reaction score
16
Trophy points
1,298
Activity points
6,806
Hi there,

As for the nets delay calculations in the Pre-P&R stage, they are done using WLM.

But, what about cells delay calculations? How is the propagation delay over the cells calculated? Where the tools take the info from?

Thank you!
 

ivlsi

Advanced Member level 3
Joined
Feb 17, 2012
Messages
879
Helped
17
Reputation
32
Reaction score
16
Trophy points
1,298
Activity points
6,806
Search for "cell_rise"/"cell_fall" in the *.lib file
Are these propagation or transition delays?

I guess that transition and propagation delays over the cells depend on the driven load... So, how is it taken into account by the tools?

Where the tools take transition delays from?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top